Mastercam Translators 2020
Mastercam supports the import and export of several file formats. You can find what file format versions are supported in each Mastercam release in the tables below.
Send any comments or questions to Mastercam support.
Version 2020
| TRANSLATOR | EXTENSIONS | VERSION | R/W | SOLIDS | INFO |
|---|---|---|---|---|---|
| ACIS | .SAB, .SAT | R29 | RW | RW | |
| Autocad | .DWG, .DXF | 2021 | RW | RW | |
| Autocad | .DWF, .DWFX | 2021 | R | N/A | |
| Autodesk Inventor | .IPT, .IAM | 2021 | R | R | Requires Inventor or Inventor View of the same version or newer. Solids only. No PMI or colors imported if only Inventor View installed. |
| Autodesk Inventor | .IDW | 2021 | R | N/A | Requires Inventor or Inventor View of the same version or newer. No PMI or colors imported if only Inventor View installed. |
| CATIA V5 Read with PMI** | .CATPart, CATProduct | R28 | R | R | |
| CATIA V5 Read** | .CATPart, CATProduct | R28 | R | R | |
| CATIA V5 Write** | .CATPart | R28 | W | W | |
| EPS | .AI, .EPS | 7,8* | R | N/A | |
| Geomagic Design | .AD_PRT, .AD_SMP | 2019 | R | R | |
| IGES | .IGS | 5.3 | RW | W | Mastercam IGES Translator |
| Solids are converted to surfaces, no views or drawing layouts are available. | |||||
| KeyCreator | .CKD | 2019 | R | R | Mastercam KeyCreator Translator |
| Translator reads solids only | |||||
| Parasolid | .X_T, .X_B, .XMT_TXT | 31 | R/W | R/W | |
| ProE / Creo** | .PRT, .ASM | Wildfire5/Creo 6 | R | R | Mastercam ProE Translator |
| ACC File Required: proE | |||||
| Raster 2 Vector | .JPG, .TIF, .BMP | N/A | R | N/A | |
| Rhino | .3DM | 6 | R | N/A | |
| SolidEdge | .PAR, .PSM, .ASM | 2020 | R | R | Translator reads solids only. |
| SOLIDWORKS | .SLDDRW | 2020 | R | N/A | SOLIDWORKS must be installed for this translator to function. |
| SOLIDWORKS | .SLDPRT, .SLDASM | 2020 | R | R | Solids only. SOLIDWORKS required for Feature History or Sketches. |
| SpaceClaim | .SCDOC | 19.0 | R | R | Mastercam 2020 SpaceClaim Translator |
| Translator reads solids only. No assembly support. | |||||
| STEP | .STP, .STEP | All | R/W | R/W | “Part 42” data/AP203, AP214, AP242 |
| Stereolithography | .STL | 1 | R/W | W | Translator creates polygonal mesh entities. |
| Unigraphics** | .PRT | NX1867 | R | R | |
| VDA | .VDA | 2 | R/W | W | Translator converts solids to surfaces. |
*Only the versions listed are supported.
** These translators are not included with Mastercam and need to be purchased for an additional cost. Please contact your Mastercam Reseller for more information.