Drivers and Utilities

These drivers and utilities have been tested and released by the Quality Control Department. Follow the instructions given in the ‘info’ button of each download for install help.

Send any comments or questions here.

Hardware Licensing

Item / Description Posted Size Info
HASP Drivers

For Mastercam X2 and Newer

04/30/2018 19 MB
Info

Use this product to install HASP drivers on Windows 7 or later.

To install:

  • Click on the Sentinel_LDK_setup.zip link and save it to your computer.
  • Extract the .zip file to your desktop.
  • Double-click on HASPUserSetup.exe.
  • Follow the installation instructions.

HASP Drivers

For Mastercam X and older

09/09/2007 4 MB
Info
Use this product to install HASP drivers for Mastercam X and older.

To install:

  • Click the drivers_x.exe link and save the download to your computer.
  • When the download is complete, double-click on the *.exe file.
  • Follow the installation instructions.

Note: The HASP key should be disconnected during the driver installation.

HASP Update Utility

HASPX.exe-Version 2020

05/30/2019 1.6 MB
Info
Use this product to install HASP codes or read your HASP.

To install:

  • Click on the haspx.zip link and save it to your computer.
  • Extract the contents of the *.zip file to your desktop.
  • Double-click on the .exe to launch the application. You must have HASP drivers installed to run this executable.
NetHASP Update Utility

NHASPX.exe-Version 2020

05/30/2019 1.5 MB
Info
Use this product to install NetHASP codes or read your NetHASP.

To install:

  • Click on the Nhaspx.zip link and save it to your computer.
  • Extract the contents of the *.zip file to your desktop.
  • Double-click on the .exe to launch the application. You must have NetHASP drivers installed to run this executable. This must also be run locally on the NetHASP server to update codes.
NetHasp License Manager

01/17/2019 14 MB
Info
Use this product to install Mastercam License Manager.

To install:

  • Click on the mastercam-licensemanager.zip link and save it to your computer.
  • Extract the .zip file to your desktop.
  • Double-click on mastercam-licensemanager.exe to run the application.
NetHASP Monitor

01/17/2011 2 MB
Info
Use this product to install Mastercam NetHASP Monitor.

This product can be used to monitor what Mastercam licenses are being used on a NetHASP.

To install:

  • Click on the mastercam-licensemanager.zip link and save it to your computer.
  • Extract the .zip file to your desktop.
  • Double-click on mastercam-licensemanager.exe to run the application.
DiagnostiX

Hardlock Diagnostic Tool

02/25/2014 5 MB
Info
The Aladdin DiagnostiX utility collects relevant information on your system and on your HASP key or Hardlock module.

To install:

  • Click on the DiagnostiX_Installer.zip link and save it to your computer.
  • When the download is complete, double-click on aksdiag32.exe.
  • Follow the installation instructions and launch the application when complete.

Software Licensing

Item / Description Posted Size Info
CodeMeter 6.9 Runtime Installation

Needed for Mastercam software licensing

08/30/2019 41 MB
Info
Use this product to install the CodeMeter software necessary to run software licensing for Mastercam.

To install:

  • Click the CodeMeterRuntime_6_9.exe link and save the download to your computer.
  • When the download is complete, double-click on the *.exe file.
  • Follow the installation instructions.
CodeMeter Binding Files

05/15/2018 1 MB
Info
You may get the error message “CodeMeterAct can’t bind the license to this machine, Error 268” when attempting to install Mastercam. If you receive this, download this file.

To install:

  • Download mastercamx9-b1-codemeter-plugin.zip.
  • Start CodeMeter by clicking on the icon in your taskbar.
  • In CodeMeter, click Process > Stop CodeMeter Service.
  • Extract the contents of the zip file to C:\Program Files (x86)\Common Files\WIBU Shared\Plugins. Overwrite the existing files.
  • In CodeMeter, click Process > Start CodeMeter Service.
Mill-Turn Server Setup

Used for configuring NetHASP servers to support the Mill-Turn CodeMeter licensing

11/13/2018 39 MB
Info
Used for configuring NetHASP servers to support Mill-Turn CodeMeter licensing. This will only run on a 64-bit operating system. The executable needs to be run on the NetHASP server.

To install:

  • Click on the mastercam-mt-nethasp-x64.exe link and save it to your computer.
  • Double-click on the .exe to launch the application on the NetHASP server. You must have HASP drivers installed to run this executable.
  • Follow the installation instructions.

Utilities

Item / Description Posted Size Info
Mastercam Activation Wizard Setup

06/20/2019 189 MB
Info
This utility will install the Mastercam Activation Wizard. The program allows the activation of Mastercam products using an activation code.
System Inspector Utility

07/17/2018 2 MB
Info
This is a small utility used to gather information and diagnose basic Mastercam-related problems on a user’s system. The program generates a text file that can be sent to Technical Support to help troubleshoot issues.

To use the Inspector Utility:

  • Click the System Inspector Utility link to save inspector-utility-20160606.zip to your computer.
  • Extract the contents of the .zip file to your desktop.
  • Double-click McamInspect.exe.
  • Choose a Mastercam version from the drop down list.
  • Click the “Sys Info” button to gather system and Mastercam information.
  • Click the “Analyze” button to check for licensing problems.
  • Click the “Create report” button to generate the text report file. It is created in the same location as “McamInspect.exe”.
MastercamDotComLinking.exe

02/25/2014 3 MB
Info
Use this product to create a linking code for Mastercam.com. If you are running a NetHASP, it may be necessary to place this file in the root of your installation directory (c:/program files/mcamx? on most systems) to generate the linking code.

To use this utility:

  • Click on MastercamDotComLinking.exe and save it to your computer.
  • Double-click the .exe to urn the utility.

Note: You must have a working HASP, NetHASP, or CodeMeter installed on the system in which you are running this utility. A general rule of thumb is that if Mastercam can’t run on the computer, it is not possible to generate a linking code.