Skip to content

EMCO HT 665MC-Plus PM SMYBx1050

Post Now Available for the MCO HT 665MC-PLUS PM SMYBx1050.

Customers using a Emco HT 665MC-PluS PM SMYB x1050 can now unlock the power of Mastercam with our latest post processor release. This post, developed in cooperation with the Siemens CNC engineers, allows users to leverage everything Mastercam has to offer on one of the industry’s most well-known machines.

Supported Features

  • Siemens 840D Control—Operate interface
  • Upper B-axis and Lower Turret operations
  • Performs milling/Turning operations using continuous stock
  • Performs pick-off, stock pull and cut-off strategies
  • Pinch Turn
  • Synchronization control for two-channel cutting sequences
  • Polar Coordinate interpolation (TMCON and TMC2ON)
  • Cylindrical interpolation (TRCON and TRC2ON)
  • Programmed coordinate conversion for coordinate rotation (CYCLE800)
  • High Speed Mode (CYCLE832)

Getting Started

If you have questions or you are ready to obtain a Emco HT 665MC-Plus PM SMYB x1050, please contact your local authorized Mastercam Reseller. You can find a local Reseller by visiting Mastercam.com/Resellers. Each post processor package comes with everything you need to get started and is backed by the support of local experts.

Note: This post requires the Mastercam Mill-Turn module to be enabled.