DMG Mori NT Series

Customers running a DMG Mori NT can now unlock the power of Mastercam with our latest post processor release. This post, developed in cooperation with the applications department at DMG Mori USA, allows users to leverage everything Mastercam has to offer on one of the industry’s most well-known machines.

DMGMori_NT

Supported Features

  • MAPPS IV
  • Performs milling/turning operations using continuous stock
  • Upper B-axis and Lower Turret operations
  • Performs pick-off, stock pull, and cut-off strategies
  • Pinch Turn
  • Sync points per stream
  • Polar Coordinate interpolation (G12.1)
  • Cylindrical interpolation (G7.1)
  • Programmed coordinate conversion for coordinate rotation (G68)
  • Tool Center Point Control for 5-axis toolpaths (G43.4)
  • Exact Stop mode
  • HSA Mode

Getting Started

If you have questions or you are ready to purchase a DMG Mori NT Series post processor, please contact your local authorized Mastercam Reseller. You can find a local Reseller by visiting Mastercam.com/Resellers. Each post processor package comes with everything you need to get started and is backed by the support of local experts who can help you make the most of your purchase.

Note: This post requires the Mastercam Mill-Turn module to be enabled.

If you need additional support, please visit our technical support page.