Free Webinar This Friday!

Join fellow Mastercam users on another FREE webinar from eApprentice.net this coming Friday, December 12 at 12 noon PST.

Topic: Using Lathe Machine Definitions

Date/Time: December 12 at 12 noon PST

Overview: How do you control multiple turrets and spindles in Mastercam? Join us for another Eapprentice webinar on using lathe machine definitions in Mastercam. How do we control multiple turrets and multiple spindles in Mastercam? The answer is that we use the lathe machine definition file to create axis combinations. These axis combinations are then used to drive the toolpaths in Mastercam, while passing parameters to the post processor. We will also take a look at how the post processor can be setup to control many important aspects of turret and spindle output for 4-axis lathe processing.

Seating is limited, so sign up today!
Register here: https://www4.gotomeeting.com/register/464970191

As always, the webinar will be recorded so even if you can’t attend, sign up so you can be notified when the recording is available.

Leave a Comment

*