Free Webinar – Importing Tooling and Fasteners in Mastercam

Tomorrow, February 6, 2013 at 12:00 PM PST, will be hosting another free webinar focused on importing tooling and fasteners in Mastercam.

Work holding is one of the cornerstones of CNC machining and process development. One of the things that we learn on horizontal machining centers is that not every part can be held in a vise. You will need to learn how to build fixtures and tooling for work holding. Importing external components into your Mastercam file can be a huge time saver for tooling and fixture design. Eapprentice will break down the process to a series of simple steps. Importing geometry downloaded from an external web site, inserting into the components into a Mastercam file, and positioning, using Dynamic Xform.

Title: Importing Tooling and Fasteners in Mastercam
Date: Wednesday, February 6, 2013
Time: 12:00 PM – 1:00 PM PST

Space is limited so make sure to sign up ASAP!
Reserve your seat at the webinar by clicking here.

After registering you will receive a confirmation email containing information about joining the Webinar.

Leave a Comment