|
|
Stengthen Your Program with Mastercam Instructor Training
Our Summer Teacher Training program is designed with the instructor in mind. Not only will we teach you to use Mastercam—you’ll learn how to teach your students to use Mastercam effectively. Collaborative, hands-on training lets you experience the projects in much the same way your students would. In addition, classes are kept small so we can focus on the needs of group.
Attending Mastercam Summer Teacher Training will give you an opportunity to learn Mastercam without the typical distractions. Interact and network with other Mastercam teachers from across North America.
 “The most rewarding thing about the training is the time I spend on the computer working in Mastercam without interference. I also enjoy learning new techniques and meeting new people."
Debra Mann
Front Range Community College
Fort Collins, CO
|
Save by registering early!
| Register by March 31, 2009: |
$500 |
| Register by May 31, 2009: |
$625 |
| Register June 1, 2009 or later: |
$675 |
Space is limited, as classes are kept small to allow a more personal learning experience.
Additional Budgeting information |
| Courses Offered |
| Date / Time |
Course |
Cost |
Location |
Description |
July 13 - 17
8 AM – 5 PM
|
Basic Projects Section 1
|
$675/week per person
Save $175 if you register before March 31st. |
Gig Harbor, Washington |
Learn introductory projects such as the medallion, tile, and cribbage board. We will show you different ways to modify these projects to match your students’ skill level. You will work through the projects much as your students would, including cutting the parts. Starting in 2010, enrollment in this class will require instructor approval or successful completion of the Mastercam Fundamentals course. Also starting in 2010, this class will be a prerequisite for the Intermediate Projects class.
Instructor: Roger Weitzel |
July 13 - 17
8 AM – 5 PM
|
Mastercam Lathe
|
$675/week per person
Save $175 if you register before March 31st. |
Gig Harbor, Washington |
Expand your lathe skills! Learn how to better utilize your lathe through projects such as a brass top, a mini bat, and chess pieces. This class is not offered every year. If you have a lathe and need to make better use of it, now is the time!
Instructor: Will Slota |
July 20 - 24
8 AM – 5 PM
|
Mastercam Fundamentals
|
$675/week per person
Save $175 if you register before March 31st. |
Gig Harbor, Washington |
This class is designed to take the complete beginner from feeling intimidated to feeling comfortable working with the tools in Mastercam. It will cover drawing, tool selection, and hold downs. The majority of the time will be spent in the classroom. Starting in 2010, this class will be a prerequisite for the Basic Projects class.
Instructor: Bob Werner |
July 20 - 24
8 AM – 5 PM
|
Basic Projects Section 2
|
$675/week per person
Save $175 if you register before March 31st. |
Gig Harbor, Washington |
Learn introductory projects such as the medallion, tile, and cribbage board. We will show you different ways to modify these projects to match your students’ skill level. You will work through the projects much as your students would, including cutting the parts. Starting in 2010, enrollment in this class will require instructor approval or successful completion of the Mastercam Fundamentals course. Also starting in 2010, this class will be a prerequisite for the Intermediate Projects class.
Instructor: Roger Weitzel |
July 27 - 31
8 AM – 5 PM
|
Intermediate Projects Section 1
|
$675/week per person
Save $175 if you register before March 31st. |
Gig Harbor, Washington |
Projects in this class are intended to challenge and intrigue intermediate students. They include projects such as a golf club head and a nameplate. As you complete the projects, you will become familiar with the problems your students might encounter while doing the projects and learn how to solve them. Class time will be divided between the classroom and the lab to produce the projects designed in class. Starting in 2010, enrollment in this class will require instructor approval or successful completion of Basic Projects.
Instructor: Dustin Spieth
|
July 27 - 31
8 AM – 5 PM
|
Mastercam Multiaxis Mill
|
$675/week per person
Save $175 if you register before March 31st. |
Gig Harbor, Washington |
Learn the multiaxis machining strategies that will allow your students to create more complex parts. In addition to learning multiaxis toolpaths, topics include: the capabilities and advantages that multiaxis toolpaths provide over conventional 3-axis toolpaths; how to identify common multiaxis configurations; and understanding the difference between multiaxis positioning and simultaneous toolpaths.
Instructor: Will Slota
Prerequisites: Prior Mastercam experience and Instructor permission required to register for this course. Please email or call the educational office at 800-ASK-MCAM to register. |
August 3 - 7
8 AM – 5 PM
|
Intermediate Projects Section 2
|
$675/week per person
Save $175 if you register before March 31st. |
Gig Harbor, Washington |
Projects in this class are intended to challenge and intrigue intermediate students. They include projects such as a golf club head and a nameplate. As you complete the projects, you will become familiar with the problems your students might encounter while doing the projects and learn how to solve them. Class time will be divided between the classroom and the lab to produce the projects designed in class. Starting in 2010, enrollment in this class will require instructor approval or successful completion of Basic Projects.
Instructor: Dustin Spieth
|
August 3 - 7
8 AM – 5 PM
|
Art
|
$675/week per person
Save $175 if you register before March 31st. |
Gig Harbor, Washington |
Add flair and personality to projects with Mastercam Art! Import original art and photographs; build complex sculptural models; and learn tricks, tips, and toolpath strategies. No CAD/CAM experience is necessary to take this class! Most instructional time is spent in the classroom.
Instructor: Iven May
|
We Want to Hear From You!
Help us tailor our program to meet your needs by letting us know if you are interested in any of the following courses:
- An additional Mastercam Fundamentals Class
- Posts
- Mastercam® for SolidWorks®
- Wire
- Other
Please email us with your opinions.
If you have any questions as to which course would be the most appropriate for your skill set and goals, please contact the educational division directly at TeacherInfo@mastercam.com.
If you want to receive updates about Summer Teacher Training, please fill out this form.
|