Create a new control definition which references the network copy of the post processor

  1. Start the Control Definition Manager from the Settings menu.
  2. Select the Open button to open a .control file.

    If your current Mastercam file already has an active machine group, you will find this button in the Control Definition Manager toolbar.
  3. Navigate to the network location and open the .control file that you just moved there. The title bar should display the proper network path:
  4. Make sure that the Control type displays the desired machine type.
  5. Click the Post Processors button.
  6. Click Add files and select the desired post processor from the network location. Click OK.
  7. Select the network post from the Post Processors drop-down menu.
  8. Save the new control definition:
    • Click the Save button to save the new control definition in the current .control file, or;
    • Click the Save As button to create a new .control file with the control definition.