Mastercam X command line switches
Use these command line switches to control which NetHASP licenses will be requested from the NetHASP server when Mastercam X is started. You can combine switches from several products in the same command line. For example, you can configure the command line to request a Mill Entry and Lathe Level 1 license by simply including both switches. Click here to learn more about using command line switches to manage licenses.
| Mastercam X command line switches |
| Mastercam X2 Design |
/D |
Design only (requires a stand-alone Design license). Use this switch if you want to load a part that contains toolpaths but do not want to check out a Mill, Lathe, or Router license. |
| Mastercam X2 Mill |
/ME |
Mill Entry |
/M1 |
Mill Level 1 |
/M2 |
Mill Level 2 |
/M3 |
Mill Level 3 |
/noM |
Disable Mill |
| Mastercam X2 Lathe |
/LE |
Lathe Entry |
/L1 |
Lathe Level 1 |
/noL |
Disable Lathe |
| Mastercam X2 Router |
/RE |
Router Entry |
/R1 |
Router |
/R2 |
Router Plus |
/R3 |
Router Pro |
/noR |
Disable Router |
| Mastercam X2 Wire |
/WE |
Wire Entry |
/W1 |
Wire |
| Mastercam X2 Art |
/A1 |
Art Entry |
/A2 |
Art Level 1 |
/noA |
Disable Art |
| Add-on products |
/S |
Solids (for Mill, Lathe, Router, Wire, or Design) |
/noS |
Disable Solids |
/C5 |
Curve/Drill5ax (Mill Level 1 or Level 2) |
/noC5 |
Disable Curve/Drill5ax |
/V5 |
Verify 5-axis |
/noV5 |
Disable Verify 5-axis |
/X5 |
Multi-axis add-on |
/noX5 |
Disable Multi-axis add-on |
| HASP and Net HASP |
/N |
Use the NetHASP over the network instead of locally; overrides the stored setting. |
/NL |
Use the NetHASP locally instead of over the network; overrides the stored setting. |
/H |
Use a local HASP instead of a NetHASP' overrides the stored setting. |
| Miscellaneous |
/noREM |
Suppresses the dialog box that requires user intervention. |
|
